复杂平面多孔模型的等几何分析

doi:10.16180/j.cnki.issn1007-7820.2020.05.007

Abstract

Abstract:

The NURBS-based geometric analysis method commonly use the same geometric description in the model design and analysis stage, which has many advantages. However, due to the limitations of the NURBS surface, it is difficult to effectively model and analyze the porous model. In order to solve the above problems, a segmentation-splicing method was adopted in this paper. In the modeling process of the porous model, the model was divided into several surface patches which were easy to be built by NURBS by using manual division and automatic division. In the analysis process, the surface patches were spliced and the control points were automatically numbered. Modeling and isogeometric analysis of the porous model was achieved in the case of C₀ continuous. Comparing the analysis results with the results obtained by ANSYS, the results of the two methods were similar, which proved the effectiveness of the new method.

Key words: finite element method, isogeometric analysis, isoparametric element, holed structures, surface blending, NURBS modeling

CLC Number:

TP391.9

CHEN Yu,CHEN Long. Isogeometric Analysis of Complex Planar Porous Model[J].Electronic Science and Technology, 2020, 33(5): 38-44.

Figures/Tables 11

Figure 1.

Figure 2.

Figure 3.

Figure 4.

Table 1

Figure 5.

Figure 6.

Figure 7.

Figure 8.

Table 2

Table 3

References 17

[1]	Hughes T J R, Cottrell J A, Bazilevs Y . Isogeometric analysis:CAD,finite elements, NURBS, exact geometry and mesh refinement[J]. Computer Methods in Applied Mechanics and Engineering, 2005,194(39-41):4135-4195.
[2]	吴紫俊, 黄正东, 左兵权 , 等. 等几何分析研究概述[J]. 机械工程学报, 2015,51(5):114-129.
	Wu Zijun, Huang Zhengdong, Zuo Bingquan , et al. Perpectives on isogeometric analysis[J]. Journal of Mechanical Engineering, 2015,51(5):114-129.
[3]	王勖成 . 有限单元法[M]. 北京: 清华大学出版社, 2003
	Wang Xucheng. Finite element method[M]. Beijing: Tsinghua University Press, 2003
[4]	产启平, 陈龙 . 基于等几何分析的非均质股骨近端模型的受力分析[J]. 电子科技, 2018,31(2):15-19.
	Chan Qiping, Chen Long . Stress analysis of heterogeneous femoral proximal model by using isogeometric analysis[J]. Electronic Science and Technology, 2018,31(2):15-19.
[5]	Vinh Phu Nguyen, Pierre Kerfriden, Marco Brino , et al. Nitsche’s method for two and three dimensional NURBS patch coupling[J]. Computational Mechanics, 2014,53(6):1163-1182.
[6]	Kapl M, Vitrih V, Jüttler B , et al. Isogeometric analysis with geometrically continuous functions on two-patch geometries I[J]. Computers and Mathematics with Applications, 2015,70(7):1518-1538. doi: 10.1016/j.camwa.2015.04.004
[7]	Pilseong Kang, Sung-Kie Youn . Isogeometric analysis of topologically complex shell structures[J]. Finite Elements in Analysis & Design, 2015,99(6):68-81.
[8]	Mario Kapl, Florian Buchegger, Michel Bercovier , et al. Isogeometric analysis with geometrically continuous functions on planar multi-patch geometries[J]. Computer Methods in Applied Mechanics and Engineering, Computer Methods in Applied Mechanics and Engineering, 2016(6):3410-3424
[9]	Kapl M, Vitrih V, Jüttler B , et al. Isogeometric analysis with geometrically continuous functions on two-patch geometries II[J]. Computers & Mathematics with Applications, 2017,72(1):209-234.
[10]	蔡守宇, 张卫红, 李杨 , 等. 一种面片删减的等几何分析新方法[J]. 中国科学:物理学力学天文学, 2013,43(2):207-218.
	Cai Shouyu, Zhang Weihong, Li Yang , et al. A new Isogeometric analysis method using patch removal[J]. Sci Sin-Phys Mech Astron, 2013,43(2):207-218.
[11]	皮格 . 非均匀有理B样条[M]. 北京: 清华大学出版社, 2010.
	Les Piegl. Non-uniform rational B-spline[M]. Beijing: Tsinghua University Press, 2010.
[12]	施法中 . 计算机辅助几何设计与非均匀有理B样条[M]. 北京: 北京航空航天大学出版社, 2000.
	Shi Fazhong. Computer-aided geometric design and non-uniform rational B-spline[M]. Beijing: Beijing University of Aeronautics and Astronautics Press, 2000.
[13]	Sheng Qianli, Xiao Pengxie, Li Tianyin. Research on robotic trajectory automatic generation method for complex surface grinding and polishing[M]. Berlin: Springer International Publishing, 2014.
[14]	陈龙, 樊兴旺, 王猛 , 等. 有限元四边单元网格模型的参数化重建[J]. 计算机辅助设计与图形学学报, 2017,29(4):680-688.
	Chen Long, Fan Xingwang, Wang Meng , et al. Parametric reconstruction of four-sided finite element mesh model[J]. Journal of Computer-Aided Design & Computer Graphics, 2017,29(4):680-688
[15]	Vladimir Puzyrev, Quanling Deng, Victor Calo . Spectral approximation properties of isogeometric analysis with variable continuity[J]. Computer Methods in Applied Mechanics and Engineering, 2018,33(4):22-39.
[16]	Katharina Birner, Bert Jüttler, Angelos Mantzaflaris . Bases and dimensions of C₁-smooth isogeometric splines on volumetric two-patch domains[J]. Graphical Models, 2018,22(4):285-298.
[17]	Austin J, Cottrell T J, Hughes R. Isogeometric analysis toward integration of CAD and FEA[M]. New Jersey: Wiley Press, 2009.

分片方式	片数	理论控制点数	拼接控制点数
手工	18	162	99
自动	26	416	305

Isogeometric Analysis of Complex Planar Porous Model

RichHTML

PDF (PC)

Like

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 11

References 17

Related Articles 13

Metrics

Comments

Recommended 10

[1]	LIU Yaze,ZHANG Shuai,GUO Liang,CHEN Xintong,WU Jiankang. Simulation Analysis of Induced Current Density of Transcranial Magnetic-Acoustical Electrical Stimulation Based on Realistic Human Head Model [J]. Electronic Science and Technology, 2021, 34(6): 17-22.
[2]	FANG Xin,WU Yaohui,SONG He. Electromagnetic Simulation Analysis of Asynchronous Motor Starting [J]. Electronic Science and Technology, 2021, 34(6): 61-66.
[3]	SAN Hongjun, LI Pengyu, CHEN Jiupeng, HU Qiongqiong, LI Qi, ZHANG Kaixiang, WANG Chen. A Design and Optimization Analysis of the Centered Positioning Mechanism [J]. Electronic Science and Technology, 2021, 34(1): 10-16.
[4]	LIU Zhuli,WANG Xudong,XU Xiaozhuo,JI Shengyang,FAN Lele. Effect of Slot Wedge Material on Electromagnetic Characteristics of PMLSM [J]. Electronic Science and Technology, 2020, 33(11): 73-78.
[5]	WANG Yang,LI Yingna,LI Chuan. Analysis on Electric Field and Electrodynamics Force of Switching Air-core Reactor [J]. Electronic Science and Technology, 2019, 32(3): 47-52.
[6]	ZHAO Hui,JIN Hai. Direct Instantaneous Torque Control of Switched Reluctance Motor Based on Fuzzy Self-tuning PI [J]. Electronic Science and Technology, 2019, 32(11): 58-63.
[7]	XU Feng, HAN Yi-Beng. Finite Element Method for Thermal Effect of Laser Irradiating Materials [J]. , 2018, 31(3): 17-.
[8]	FENG Yanglei，SHEN Jingfeng. Structural Optimization Analysis of Approximate Middle Channel Plate [J]. , 2017, 30(9): 149-.
[9]	SUN Yi 1，CHU Chaomei 1，GU Jianhua 2. Simulation of Thermal Load of the Dual Clutches of Dual Clutch Transmission [J]. , 2017, 30(4): 64-.
[10]	QIU Bowen,LI Haolin. Applications of Hyperworks in Dynamic and Static Analysis of Machine Tool Bed [J]. , 2016, 29(3): 25-.
[11]	XU Baiqiang,ZHANG Jingxiu,XU Guidong,XU Chenguang. Spectral Finite Element Analysis of Surface Damage on Metal Beam Structure [J]. , 2015, 28(12): 5-.
[12]	WU Gang. Fast Analysis of Radiation Characteristics by FEM Algorithm in the Presence of Radome [J]. , 2013, 26(8): 64-.
[13]	XU Jie-Tian, ZHANG Meng, LI Jie, XIONG Xue-You. High-frequency Characteristics of Resonance Cavity Based on the Vector Finite Element Method [J]. , 2010, 23(10): 59-61.